CMM GANTRY MCT STARLIGHT-3d-vinaCMM GANTRY MCT STARLIGHT-3d-vina

CMM GANTRY MCT STARLIGHT

Liên hệ

Danh mục: , Từ khóa: , , , , , , , , , ,
Số lượng:
Mua ngay
  • Vận chuyển giao hàng toàn quốc
  • Phương thức thanh toán linh hoạt
  • Gọi ngay +84 978.190.642 để mua và đặt hàng nhanh chóng

MÔ TẢ SẢN PHẨM

GENERAL FEATURES

FEATURES AND BENEFITS

  • Generous pad spacing sizing for optimal mechanical rigidity
  • High-rigidity Y main crossbar with unique tubular steel design
  • Z spindle made of extruded aluminum alloy provides rigidity and minimizes the moment of inertia.
  • X-beams with large cross-sectional area made of stabilized steel and equipped with support system that allow linear expansion without induced deformation
  • High-strength epoxy resin X/Y axis slideways ground (roughness 0.4 mm)
  • Measuring system with high-resolution (0.1µm) linear transducers with “Dual Reader” system on longitudinal X axis
  • “Dual Drive” system on longitudinal X axis (optional, standard for Y=3000 stroke)
  • Multi-sensor system for automatic compensation of errors due to thermal expansion of structural components.

ENVIRONMENT

  • Temperature range for metrological specifications:
    Ambient temperature: 18 ÷ 22 °C
    Maximum hourly gradient: 1.0 °K/h
    Maximum daily gradient: 2.0 °K/24h
    Maximum gradient in volume: 0.5 °K/m (SL NT) – 1.0 °K (SL)
  • Operating temperature: 15 to 35 °C
  • Relative humidity for operation: 40 to 80 % (non-condensing)
  • Allowable vibration: (Peak/peak acceleration)
    30 mm/s2 between 1 and 10 Hz
    15 mm/s2 between 10 and 20 Hz
    50 mm/s2 between 20 and 100 Hz

FEEDS

  • Pressure: 6 Bar
  • Air consumption: maximum 300 Nl/min
  • Power supply:
    230 V ± 10%; 50 Hz ± 2% (single-phase)
    115 V ±10%; 60 Hz ± 2% (single-phase)

MEASURING HEADS AND PROBES

  • Manual Heads: MIH, MH20, MH20i
  • Motorized Heads: PH10M, PH10MQ
  • Indexable Motorized Heads: PH20, REVO
  • Point-to-point touchers: TP2, TP20, TP200
  • Analog keyers: SP600, SP25M, SP80
  • Probe and tip changing systems: Automatic changing stations

PERFORMANCE

Each COORD3 CMM is tested according to UNI EN ISO 10360-2 standards.

MCT STARLIGHT

The indicated performance is valid under the following conditions:
– TP2/TP20-5W/TP200: Ø4mm x stylus length 10mm
– SP25: SM1, stylus length 50mm Ø5mm
– REVO: RSP2/RSH175 – RSP3-1/SH25-1, stylus length 20mm
– SP80: Ø 5mm stylus length 50mm
– L= measurement length in mm
– Ambient temperature conditions:
T: 18÷22 °C; Gradients max: 1.0 °C/h – 2.0 °C/24h – 1.0 °C/m

[1] Maximum Permissible Error on length measurements according to ISO 10360-2
[2] Maximum Permissible Error on Point Grip according to ISO 10360-2
[3] Maximum Permissible Error of Point Grip on scanning according to ISO 10360-4 for SP25M/SP80/REVO probes.

 

MCT STARLIGHT NT

The indicated performance is valid under the following conditions:
– TP2/TP20-5W/TP200: Ø4mm x stylus length 10mm
– SP25: SM1, stylus length 50mm Ø5mm
– REVO: RSP2/RSH175 – RSP3-1/SH25-1, stylus length 20mm
– SP80: SM1, Ø 5mm stylus length 50mm
– L= measurement length in mm
– Ambient temperature conditions:
T: 18÷22 °C; Gradients max: 1.0 °C/h – 2.0 °C/24h – 0.5 °C/m

[1] Maximum Permissible Error on length measurements according to ISO 10360-2
[2] Maximum Permissible Error on Point Grip according to ISO 10360-2
[3] Maximum Permissible Error of Point Grip on scanning according to ISO 10360-4 for SP25M/SP80/REVO probes.

OPTIONS

  • Multi-wire wiring
  • Models and dimensions:
    COORD3 MCT STARLIGHT CMMs are available with the following measuring strokes (Y.Z mm):
    20.20/25.18/25.20/30.20/30.25

Đánh giá

Chưa có đánh giá nào.

Đánh giá sản phẩm
Write a review

Sản phẩm liên quan