CMM GANTRY MCT NT-3d-vinaCMM GANTRY MCT NT-3d-vina

CMM GANTRY | MCT NT

Liên hệ

Danh mục: , , Thẻ: , , , , , , , , , ,
Số lượng:
Mua ngay
  • Vận chuyển giao hàng toàn quốc
  • Phương thức thanh toán linh hoạt
  • Gọi ngay +84 978.190.642 để mua và đặt hàng nhanh chóng

MÔ TẢ SẢN PHẨM

GENERAL FEATURES

The MCT NT is also available in the NT LIGHT configuration, that is, a CMM equipped with a light aluminum alloy Z spindle and x-axis “Single Read” system.

FEATURES AND BENEFITS

  • Main crossbar y made of light aluminum alloy for maximum rigidity and minimum moving mass
  • Silicon Carbide Z spindle: the use of this material ensures exceptional performance in terms of rigidity and thermal stability
  • Multi-sensor system for automatic compensation of errors due to thermal expansion of structural components.
  • “Dual Read” system on both X-spars, enables maintenance of excellent metrological performance up to cross sections of 2500 x 1800 mm
  • Spars (X-axis) with controlled expansion
  • Optical lines with high resolution free expansion system (0.1µm)
  • Can be equipped with a complete fairing and bellows system on the main movable structure (X / Y axes)

ENVIRONMENT

  • Temperature range for metrological specifications:
    Ambient temperature: 18 ÷ 22 °C
    Maximum hourly gradient: 1.0 °C/h
    Maximum daily gradient: 2.0 °C/24h
    Maximum gradient in volume: 1.0 °C/m
  • Operating temperature: 15 to 35 °C
  • Relative humidity for operation: 40 to 80 % (non-condensing)
  • Allowable vibration: (Peak/peak acceleration)
    30 mm/s2 between 1 and 10 Hz
    15 mm/s2 between 10 and 20 Hz
    50 mm/s2 between 20 and 100 Hz

FEEDS

  • Pressure: 5.5 Bar
  • Air consumption: 150Nl/min
  • Power supply:
    230 V ± 10%; 50 Hz ± 2% (single-phase)
    115 V ±10%; 60 Hz ± 2% (single-phase)

MEASURING HEADS AND PROBES

  • Manual Heads: MIH, MH20, MH20i
  • Indexable Motorized Heads: PH10T, PH10M, PH10MQ, PH20, REVO
  • Point-to-point touchers: TP2, TP20, TP200
  • Analog keyers: SP25M
  • Laser Sensors: Perceptron Laser Scanner
  • Probe and tip changing systems: Automatic changing stations

PERFORMANCE

Each COORD3 CMM is tested according to UNI EN ISO 10360-2 standards.

MCT-NT

The indicated performance is valid under the following conditions:
– PH10M/PH10MQ/PH20/TP20/TP200: Ø4mm x stylus length20mm
– PH10MQ/SP25: SM1, stylus Ø 5mm x 50mm
– L= measurement length in mm
– Ambient temperature conditions:
T: 18÷22 °C; Gradients max: 1.0 °C/h – 2.0 °C/24h – 0.5 °C/m

[1] Maximum Permissible Error on length measurements according to ISO 10360-2
[2] Maximum Permissible Error on Point Grip according to ISO 10360-2
[3] Maximum Permissible Error of Point Grip on scanning according to ISO 10360-4 for SP25M/SP80 probes.

MCT NT LIGHT

The indicated performance is valid under the following conditions:
– PH10M/PH10MQ/PH20/TP20/TP200: Ø4mm x stylus length20mm
– L= measurement length in mm
– Ambient temperature conditions:
T: 18÷22 °C; Max gradients: 1.0 °C/h – 2.0 °C/24h – 0.5 °C/m

[1] Maximum Permissible Error on length measurements according to ISO 10360-2
[2] Maximum Permissible Error on point taking according to ISO 10360-2

OPTIONS

  • Multi-wire wiring
  • Manual/automatic pallet loading/unloading system
  • PC and Printer
  • Training at Coord3 center or agents
  • Installation by Coord3 staff or agents
  • Models and dimensions:
    COORD3 MCT NT CMMs are available with the following measuring strokes (Y.Z mm):
    20.10/20.15/25.18

Đánh giá

Chưa có đánh giá nào.

Đánh giá sản phẩm
Write a review

Sản phẩm liên quan