Trang chủ / Sản phẩm / Máy đo 3D - CMM / Coord3 / CMM GANTRY | MCT PLUS
CMM GANTRY | MCT PLUS
Liên hệ
Danh mục: Coord3, Coord3, Máy đo 2D - Máy đo 3D
Thẻ: 3d vina, bán CMM GANTRY MCT PLUS, CMM GANTRY MCT PLUS, hiệu chuẩn, hiệu chuẩn thiết bị, máy đo 2d, máy đo 3d, máy đo cmm, sửa máy đo 2d, sửa máy đo 3d, sửa máy đo cmm
- Vận chuyển giao hàng toàn quốc
- Phương thức thanh toán linh hoạt
- Gọi ngay +84 978.190.642 để mua và đặt hàng nhanh chóng
MÔ TẢ SẢN PHẨM
GENERAL FEATURES
FEATURES AND BENEFITS
- Generous pad spacing sizing for optimal mechanical rigidity
- X and Y axes with pinion/rack drive system for efficient movement of main axes
- X-beams with large cross-sectional area made of stabilized steel and equipped with support system on the abutments that allow linear expansion without stress and induced deformation
- Measurement system with high-resolution (0.1µm) linear transducers and “Dual Reader” and “Dual Drive” system on longitudinal X axis
- Multi-sensor system for automatic compensation of errors due to thermal expansion of structural components.
ENVIRONMENT
- Temperature rating: 20 °C
- Temperature range: 18 – 22 °C
- Maximum hourly gradient: 0.5 °C/h
- Maximum daily gradient: 2 °C/24h
- Maximum gradient in volume: 0.5 °C/m
- Operating temperature: 15 to 35 °C
- Relative humidity for operation: 40 to 80 % (non-condensing)
- Allowable vibrations:
30 mm/s2 between 1 and 10 Hz
15 mm/s2 between 10 and 20 Hz
50 mm/s2 between 20 and 100 Hz
SERVICES
- Pressure: 5 Bar
- Air consumption: 100 Nl/min
- Power supply: 230 V 50 Hz or 110 V 60 Hz (± 2% single phase)
- Maximum power consumption: 10 A 1200 W
PERFORMANCE
Each COORD3 CMM is tested according to UNI EN ISO 10360-2 standards.
OPTIONS
Models and dimensions:
COORD3 MCT PLUS CMMs are available with the following measuring strokes (Y.Z mm):
20.20 / 25.18 / 25.20 / 30.20 / 30.25
Đánh giá sản phẩm Hủy
Write a review
Đánh giá
Chưa có đánh giá nào.