Danh mục sản phẩm
Chân cảm biến đo độ rung SKF CMSS 910M 910F
Liên hệ
- Vận chuyển giao hàng toàn quốc
- Phương thức thanh toán linh hoạt
- Gọi ngay +84 978.190.642 để mua và đặt hàng nhanh chóng
MÔ TẢ SẢN PHẨM
Description CMSS 910M
Cementing stud with 1/4-28 male
• Cementing studs for sensors with 1/4-28 tapped threads
• Material: Stainless steel
• Recommended mounting torque: 2,9 Nm (24 in. lbs.)
• Frequency response: Flat up to about 80% of the speciied response value using epoxy or similar cement; lat up to about 30% of the speciied response value using double-sided tape
Note: To avoid sensor damage, always remove the sensor from the cementing stud irst, then remove the stud from the surface by means of a wrench using the lats provided
Recommended with Loctite 454 adhesive gel (not included).
Description CMSS 910F
Cementing stud with 1/4-28 female
• Cementing studs for sensors requiring 1/4-28 tapped mounting threads (see page 97 for adapters to M6, M8 and 10-32 thread accelerometers); includes key notch for consistent triaxial axis orientation
• Material: Stainless steel
• Recommended mounting torque: 2,9 Nm (24 in. lbs.)
• Frequency response: Flat up to about 80% of the speciied response value using epoxy or similar cement; lat up to about 30% of the speciied response value using double-sided tape
Note: To avoid sensor damage, always remove the sensor from the cementing stud irst, then remove the stud from the surface by means of a wrench using the lats provided
Recommended with Loctite 454 adhesive gel (not included).
Đánh giá
Chưa có đánh giá nào.