Danh mục sản phẩm
Máy đo lực kéo nén SHIMPO FGS-HB
Liên hệ
- Vận chuyển giao hàng toàn quốc
- Phương thức thanh toán linh hoạt
- Gọi ngay +84 978.190.642 để mua và đặt hàng nhanh chóng
MÔ TẢ SẢN PHẨM
FGS-HB Series – Manual Test Stands for Force Gauges (Vertical Type / Handle Operated)
By changing force gauges (push-pull gauges), loads ranging from 2 N to 2,500 N can be measured with this force gauge stand. One turn of the handle moves the carriage approximately 1.33 mm (FGS-100HB), thus measurement can be performed with minute movements. In addition, it is possible to output a signal when an overload is applied to the unit.
Features
A wider range of loads
- Loads ranging from 2 N to 2,500 N (0.2-250 kg) can be measured. Various types of force gauges can be mounted.
- Note: Force gauges are sold separately.
(Digital force gauges other than the FGP Series listed above can be mounted as well. However, please note that separate adapter plates are required to mount them.)
Longer stroke
- The mounted force gauge can be moved by up to 400 mm to perform various types of tests.
Handle operated for minute movement
- FGS-100HB: Approx. 1.33 mm per turn of the handle
- FGS-250HB: Approx. 0.55 mm per turn of the handle
| Load capacity | 1000 N (100 kg), 2500 N (250 kg) |
|---|---|
| Supportable force gauges | FGP Series, FGPX Series, FGPX-H Series |
Specifications
| form | FGS-100HB | FGS-250HB |
|---|---|---|
| Measured load | 1000N（100kgf） | 2500N（250kgf） |
| Load capacity | 1000N（100kgf） | 2500N（250kgf） |
| stroke | 400mm | |
| One turn of the handle | About 1.33mm | About 0.55mm |
| quality | About 56kg | |
| Measurement table | 150 × 200mm | |
| Corresponding force gauge | FGN-0.2～50 FGP-0.2～50,100 FGPX-0.2～50,100 | FGN-0.2 ~ 50 |
| FGP-0.2～50,100 | ||
| FGPX-0.2～50,100 | ||
| FGPX-250H | ||
Đánh giá
Chưa có đánh giá nào.